English
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
2023 Manufacturers Hot PVC Soft Adhesive Transparent Particle PVC Composite Material
Product Description This kind of material is made of halogen-free non-toxic EPDM resin as the main raw material, adding
Description
Basic Info.
| Model NO. | rubber particles |
| Specification | 1-2mm 2-3mm 2-4mm |
| Trademark | feiheng |
| Origin | Shandong |
| HS Code | 40027010 |
| Production Capacity | 50tons/Year |
Product Description
Product DescriptionThis kind of material is made of halogen-free non-toxic EPDM resin as the main raw material, adding various additives, mixing, extrusion and granulation. This kind of material has the characteristics of good extrusion performance, excellent physical and mechanical properties, high temperature resistance and so on. It has the best cost performance.
| Application | For EV charging |
| Hardness | ≤85 A |
| Density | ≤1.450 g/cm3 |
| Tensile strength(post-irradiation) | ≥11.5Mpa |
| Elongation at break(post-irradiation) | ≥200% |
| Thermal extension(200ºC×15min×0.2MPa) | Under load ≤45%, Permanent deformation 0-10% |
| Tensile strength retention | 158ºC×168h,88% |
| Elongation retention | 158ºC×168h,89% |
| Volume resistivity @20ºC | 1.8×1015 Ω.cm |
| Flexibility | 158ºC,168h,No cracks |
| Dielectric strength | 28 MV/m |
| Brittle temperature | -40ºC |
| Brittle temperature | VW-1,Single vertical combustion IEC60332-1-2 |
| Halogen-free | Cl≤900ppm,Br≤900ppm,Cl+Br≤1500ppm PH≥4.3,Conductivity≤10us/mm |
| Thermal deformation | 121ºC,1h,No cracks on the outside and inside,Maximum thickness change≤49% |
Prev: Purchase High Quality PP Particles /PP Composite Particles /PP Pipe Plastic Raw Materials
Next: Aluminum Composite Panel PE for Ads Printing Board Signature Decorative Building Materials
Our Contact
Send now
